|
Brief introduction on MHI diesel generator sets
Renhe company, one of the two authorized regional distributors in China, has been co-operating with MHI for many years on the sales of MGS Serial generator sets.
MHI MGS Serial diesel generator sets are fully made by MHI as well as test and assembling. And total sets are original imported.
Excellent electric output performance and economical fuel combustion features.
The outstanding three features over the other world famous generator sets:
1¡¢economical fuel combustion
2¡¢easy maintenance
3¡¢reliable structure
¡öGeneral Features
Durability: tested for its durability, the MHI generator sets are well-known for their durable performance.
Intellectual control: Equipped with all intellectual control system. Because of its micro-controller, all the dependent units are canceled. In this way, a precise and total display is achieved. Also the intellectual protection on both the alternators and engines makes the operation easier.
A Well-know production: Made by the world-famous industrial supplier¡±Mitsubishi Heavy Industries, Ltd.¡± The main parts are designed, manufactured and tested by MHI.
¡öManufacturing standards
ISO8528¡¢IEC (International Electrotechnical Commission) J.I.S Japan Industrial Standards
J.E.C. Standard of the Japanese Electrotechnical Committee J.E.M. The standard of Japan Electrical Manufacturers Association
¡öPainting
Mitsubishi standard (Dark Blue) Munsell 6.0PB 4.4/5.2
¡öGenset Electric performance
Meet the requirements of BS EN60950 low pressure, BS EN50081-2 and 50082-2 EMC.
1. Rated Voltage: 400/230V
2. Connecting methods: 3 Phase, 4 Wires
3. Rated Frequency: 50Hz
4. Power factor: 0.8 (lagging)
5. Suppression RFI: Up to VDE0875 Level and standard of GB2820.
6. Gensets of 60Hz or other system are available upon request.
¡öDiesel engines
MHI diesel engines
Manufacturer: Mitsubishi Heavy Industries, Ltd.
Structure features: Fuel direct injection, electric governor, 4 stroke fan radiator cooling, under the requirements of ISO3046.
¡ôFuel injection system: injection pump, lower pressure feeding pump, fuel filters.
¡ôlubrication system: sump, engine-driven lubricating oil pump, oil cooler, oil filters, crankcase breather.
¡ôintaking and exhaust system: air filters, exhaust turbo-charge, after-cooler, dry exhaust manifold.
¡ôstarting system: 24V DC starter.
¡ôcooling system: engine-driven water pump, looped water in fan and radiator, thermostat for the cooling water temperature.
¡ôstop system: energize to run type solenoid on the fuel linkage.
¡öAlternator
Stamford U.K/ KATO U.S.
Place of origin: UK/ US
¡ôExcitation method: Brushless, self-excited
¡ôInsulation Class: H
¡ôVoltage regulator: AVR
¡ôCooling system: Air cooled
¡ôWinding features: with the anti-humid, oil and acid varnished three layers, the Gensets can withstand 300% of the rated current for 10 seconds.
¡öcontrol system
MGS automatic control panel are programmable microprocessor on start and stop. With the display for the operating status and failure, the panels will stop the Genset automatically and disply the engine failure by the LCD and LED.
¡öCommon Skid
The whole set and other equipments are mounted on the steel common skid with rubber anti-vibrators and security belts.
Standard Specification£º
1¡¢Silencer, flexible pipe
2¡¢Starting battery and connecting cable
3¡¢Flank and rubber anti-vibrators
4¡¢Documents
Options(only some sample options are listed below, and please subject to actual requests from end-users)
1¡¢ABB Air circuit breaker
2¡¢Main power floating charger
3¡¢Pre-heater for the cooling system
4¡¢Daily tank
5¡¢Parallel switchgear
6¡¢Automatic transfer switchgear
|
